6. Click [OK].
The count for the selected paper type becomes 0 and [Modified] is displayed for [Status].
7. On the [Edit] menu, click [Apply Settings].
Changes are applied to information on the User Counter Information tab.
8. Click [Exit] on the [File] menu to quit User Management Tool.
Restricting Functions
Follow the procedure below to restrict use of individual functions.
1. Start SmartDeviceMonitor for Admin User Management Tool.
2. Click the [User Counter Information] tab of User Management Tool.
3. Click the user whose functions you want to restrict.
Using SmartDeviceMonitor for Admin
43
To Next Page
Loading...
