6. Peel the sheet [A] off, and then remove the Front IR Sensor [B].
Notes on Installation
Attach the harness to guide (three red circles as shown) on bottom cover.
Optical Engine, DMD Fan
Optical Engine [A] is comprised of the following parts:
1. Engine Unit
Lens Module, DMD Module (DMD Chip, DMD Board)
2. Combiner Unit
Heat Sink, Heat Pipe, Laser Bank (Laser Diode, Laser Bank Board), Phosphor Wheel
3. Filter Wheel
Part Replacement
63
To Next Page
Loading...
Need help?
General
