Setting Items Max. Value Min. Value Step Unit
[Registration Motor Feed Speed] 3.0 -3.0 0.1 %
*1
The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
076: [First Transport Motor Feed Speed]
Adjust the first transport motor's speed.
The first transport motor drives the roller in the paper transport path in Tray 1's paper feed unit.
Press [+] to increase the speed and [−] to reduce it.
If you change 075: [Registration Motor Feed Speed], increase or decrease this speed by the same
amount.
Setting Items Max. Value Min. Value Step Unit
[First Transport Motor Feed Speed] 3.0 -3.0 0.1 %
077: [Second Transport Motor Feed Speed]
Adjust the second transport motor's speed.
The second transport motor drives the roller in the paper transport path in Tray 2's paper feed unit.
Press [+] to increase the speed and [−] to reduce it.
If you change 075: [Registration Motor Feed Speed], increase or decrease this speed by the same
amount.
Setting Items Max. Value Min. Value Step Unit
[Second Transport Motor Feed Speed] 3.0 -3.0 0.1 %
078: [Third Transport Motor Feed Speed]
Adjust the third transport motor's speed.
The third transport motor drives the roller in the paper transport path in Tray 3's paper feed unit.
Press [+] to increase the speed and [−] to reduce it.
If you change 075: [Registration Motor Feed Speed], increase or decrease this speed by the same
amount.
Setting Values
121
To Next Page
Loading...
