Setting Items Max. Value Min. Value Step Unit
[Third Transport Motor Feed Speed] 3.0 -3.0 0.1 %
080: [Relay Transport Motor Feed Speed: CW]
Adjust the relay transport motor's rotation speed (clockwise rotation).
The relay transport motor drives the relay transport roller, which feeds paper to the registration roller.
This setting is applied when paper is fed from the machine's paper tray or optional LCT/Wide LCT.
Press [+] to increase the speed and [−] to reduce it.
If you change 075: [Registration Motor Feed Speed], increase or decrease this speed by the same
amount.
Setting Items Max. Value Min. Value Step Unit
[Relay Transport Motor Feed Speed: CW] 3.0 -3.0 0.1 %
081: [Relay Transport Motor Feed Speed: CCW]
Adjust the relay transport motor's rotation speed (counterclockwise rotation).
The relay transport motor drives the relay transport roller, which feeds paper to the registration roller.
This setting is applied when paper is fed from the bypass tray.
Press [+] to increase the speed and [−] to reduce it.
If you change 075: [Registration Motor Feed Speed], increase or decrease this speed by the same
amount.
Setting Items Max. Value Min. Value Step Unit
[Relay Transport Motor Feed Speed:
CCW]
3.0 -3.0 0.1 %
083 – 085: [Paper Transfer Belt Speed Env corr]
Adjust the speed of the paper transfer belt.
Press [+] to increase the speed and [−] to reduce it.
To adjust the speed of the paper transfer belt, usually use 069: [Paper Transfer Belt Feed Speed].
Use this speed adjustment when moving the machine to a different environment (resulting in a change in
temperature and/or humidity), causing an image to be printed abnormally due to improper paper
feeding.
4. Details of Menu Items in Advanced Settings
122
To Next Page
Loading...
