Setting Items Max. Value Min. Value Step Unit
[Ppr Trns CV: Start Timing: FC: Side 2] 100 0 1 ms
039: [Ppr Trns CV: Duration: BW: Side 1]
Adjust the duration of constant voltage control for the bias on Side 1 during paper transfer when printing
in black-and-white mode.
Use this to adjust transferability at the leading edge of the paper.
Press [+] or [−] to adjust the duration.
• For the bias during paper transfer at the start of printing, the machine performs constant voltage
control and then switches to constant current control. If you set "CV Start Timing" to "50ms" and "CV
Control Duration" to "30ms", constant voltage control for the paper transfer bias starts 50
milliseconds before printing a sheet and lasts for 30 milliseconds,. This is followed by constant
current control for the remaining 20 milliseconds, after which printing starts.
Setting Items Max. Value Min. Value Step Unit
[Ppr Trns CV: Duration: BW: Side 1] 100 0 1 ms
040: [Ppr Trns CV: Duration: BW: Side 2]
Adjust the duration of constant voltage control for the bias on Side 2 during paper transfer when printing
in black-and-white mode.
Use this to adjust transferability at the leading edge of the paper.
Press [+] or [−] to adjust the duration.
Setting Items Max. Value Min. Value Step Unit
[Ppr Trns CV: Duration: BW: Side 2] 100 0 1 ms
043: [Ppr Trns CV: Duration: FC: Side 1]
Adjust the duration of constant voltage control for the bias on Side 1 during paper transfer when printing
in full color.
Press [+] or [−] to adjust the duration.
4. Details of Menu Items in Advanced Settings
136
To Next Page
Loading...
