117: [Gate Fold Position 2]
Adjust the fold width of the bottom segment 2 (S2) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S2) and [−] to reduce it.
The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration
shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
CEZ009
L3
L3
S2
Paper feed direction
Setting Items Max. Value Min. Value Step Unit
[Gate Fold Position 2] 4.0 -4.0 0.2 mm
• You cannot specify this setting when using 12" × 18" paper.
118: [Gate Fold Position 3]
Adjust the fold position of the bottom segment 3 (S3) of gate folded sheets when using the multi-folding
unit.
Press [+] to increase (S3) and [−] to reduce it.
The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration
shows a fully folded sheet.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
4. Details of Menu Items in Advanced Settings
156
To Next Page
Loading...
