No. Item Description
0803 [Staple Position: With
Feed]
Adjust the horizontal position of the staples when using
Finisher SR5070 or Booklet Finisher SR5080.
0804 [Paper Alignment for
Stapling: Across Feed]
Adjust the width of the staple jogger for edge stapling
when using Finisher SR5070 or Booklet Finisher
SR5080.
0805 [Paper Alignment for
Stapling: With Feed]
Adjust the travel distance of the paper edge stopper for
edge stapling when using Finisher SR5070 or Booklet
Finisher SR5080.
0806 [Number of Sheet Align for
Stapling]
Specify the number of sheets the staple unit aligns at a
time for stapling.
0807 [Punch Position: Across
Feed]
Adjust the vertical position of the punch holes when using
Finisher SR5070 or Booklet Finisher SR5080.
0808 [Punch Position: With Feed] Adjust the horizontal position of the punch holes when
using Finisher SR5070 or Booklet Finisher SR5080.
0809 [Correct Punch Skew] Specify whether or not to enable punch skew correction
when using Finisher SR5070 or Booklet Finisher
SR5080.
0810 [Punch Skew Correction] Adjust the amount of skew correction for punching when
using Finisher SR5070 or Booklet Finisher SR5080.
0811 [Paper Alignment in Shift
Tray Setting]
Specify the accuracy of printed paper alignment when
applying shift-sorting with Finisher SR5070 or Booklet
Finisher SR5080.
0812 [Paper Alignment in Shift
Tray: Across Feed]
Adjust the width of the paper alignment jogger in the shift
tray when using Finisher SR5070 or Booklet Finisher
SR5080.
0813 [Output Tray Descending
Position]
Specify the descending position for the finisher shift tray
when paper is delivered to it using Finisher SR5070 or
Booklet Finisher SR5080.
0814 [Exit Guide Close Timing:
Booklet Fin]
Specify when to close the exit guide after paper is
delivered to the finisher shift tray of Finisher SR5070 or
Booklet Finisher SR5080.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
24
To Next Page
Loading...
Need help?
General
