Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 1]
*1
9.0 -9.0 0.1 mm
[Tray 2]
[Tray 3]
[Bypass Tray]
[2 Sided]
[LCT]
[Paper Weight 1]
[Paper Weight 2]
[Paper Weight 3]
[Paper Weight 4]
[Paper Weight 5]
[Paper Weight 6]
[Paper Weight 7]
[Paper Weight 8]
[Paper Weight 9]
*1
The factory-set value is preset.
• If paper is delivered face-down, turn it over in the paper feed direction and check the image
position.
• If the leading-edge margin on Side 1 of the paper is too narrow, paper jams may occur.
• If the trailing-edge margin on Side 1 of the paper is too narrow, paper jams may occur when
printing on the back side of paper during duplex printing.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
28
To Next Page
Loading...
