1.Detailed Descriptions
44
Jogger
The Booklet Jogger Motor (STM11) [A] moves the jogger fences [B] in to align the sides of each page.
When a job starts, the jogger fences move to the ready position (this depends on the paper size).
Bottom Fence Operation / Stapling
The stack that is pushed with the stack junction gate bumps against the bottom fence [B] in order to
align the stack. Then the booklet staplers [C] staple at the middle points of the stack. After that, the
Booklet Bottom Fence Motor (STM12) [A] moves the bottom fence [B] up to the position where the
stack is folded with the fold plate.
To Next Page
Loading...
