1.Replacement and Adjustment
49
Difference in
Alignment
Folding
Strength
Thickness of the
booklet
The amount of toner sticking to the
folding line
3mm (default) Strong Thin OK
0mm Weak Thick Good
5. Close the bracket after the adjustment.
6. Reassemble the machine.
Adjusting the Folding Speed
You can adjust the thickness of the booklet by adjusting the moving speed of the flat fold booklet unit.
If you want to make the booklet thinner, set a slower speed. If you want to make the booklet thicker, set a faster
speed.
1. Enter the SP mode.
2. Set the moving speed of the flat fold booklet unit for each paper size with SP6-114-001 to 010 (Fold Speed
Adj.: 2K/3K FIN).
SP Setting Items Selection Default Value
SP6-114-001 Fold Speed Adj.: 2K/3K FIN: A3 SEF 0: Standard (faster)
1: Middle (slow)
2: Low (very slow)
0: Standard
SP6-114-002 Fold Speed Adj.: 2K/3K FIN: B4 SEF
SP6-114-003 Fold Speed Adj.: 2K/3K FIN: A4 SEF
SP6-114-004 Fold Speed Adj.: 2K/3K FIN: B5 SEF
SP6-114-005 Fold Speed Adj.: 2K/3K FIN: DLT SEF
SP6-114-006 Fold Speed Adj.: 2K/3K FIN: LG SEF
SP6-114-007 Fold Speed Adj.: 2K/3K FIN: LT SEF
SP6-114-008 Fold Speed Adj.: 2K/3K FIN: 12"x18"
SP6-114-009 Fold Speed Adj.: 2K/3K FIN: 8K SEF
SP6-114-010 Fold Speed Adj.: 2K/3K FIN: Other
3. Exit the SP mode.
Flat Fold Booklet Unit Home Position Adjustment
1. Pull out the stapling unit [A].
To Next Page
Loading...
