2.Detailed Descriptions
71
Operation Details
Shift Operation (Shift Transport)
To output paper, the shift roller motor [A] moves the shift roller [B] side-to-side while a job is in progress. The
shift roller HP sensor [C] is used to control this mechanism.
Pre-stack Operation (In Corner Stapling)
• Pre-stack Capacity: 1 sheet
• Pre-stack Size: A4 SEF/LEF, B5 SEF/LEF, LT SEF/LEF
There are four steps as follows:
1. The upper tray exit guide plate [A] shifts up (open). Paper comes through the entrance transport path and
reaches the relay transport path.
2. After the paper passes the pre-stack junction gate [A], the pre-stack junction gate [A] shifts down (closed)
and the relay transport roller [C] rotates in reverse. The pre-stack roller [B] rotates to feed the paper to the
To Next Page
Loading...
