Rigaku MFM65 - Lock-Out; Tag-Out

− 11 −
ME12058B
Maintenance Section
2.4 Lock-out / Tag-out
WARNING
When electrical power off and isolating the cooling water of facility, strictly follow
lock-out/tag-out of the instrument as follows.
In the daily operation, the lock-out/tag-out of the cooling water is normally
unnecessary.
(1) The main breaker lock-out handle
1. Pull down the lock-out handle.
2. Set the tag to the lock-out handle.
3. Lock the tag.
(2) The cooling water lock-out
1. Open the lower panel on the left side.
2. Remove the internal cover.
.
The
p
ower box on the rear side
Fig. 2-4-1 Lock-out Handle
Fig. 2-4-2 Water Lock-out
4. Lock-out the bulbs.
3. Close the bulbs