95 • Chapter 5: User Mode and Calibration GX-3R Pro Operator’s Manual
ESCAPE
1. While in the BUMP SETTING\BUMP PARAMETER menu, use AIR to place the cursor
next to ESCAPE.
2. Press and release POWER MODE. The instrument returns to the BUMP PARAMETER
menu.
BUMP REMINDER
ON: The GX-3R Pro gives an indication at start up if it is due for bump testing. The type of
indication depends on the BUMP EXPIRED setting (see page 97).
OFF (factory setting): The GX-3R Pro does not give an indication at start up if it is due for bump
testing.
1. While in the BUMP SETTING menu, use AIR to place the cursor next to BUMP
REMINDER.
2. Press and release POWER MODE. The current setting flashes.
3. Use AIR to display the desired setting.
4. Press and release POWER MODE to save the setting and return to the BUMP SETTING
menu.
5. See “ESCAPE” on page 98 to return to User Mode.
MAINTE 7:49
CAL TIME
AUTO CAL
ESCAPE
BUMP PARAMETER
MAINTE 7:49
BUMP PARAMETER
BUMP REMINDER
BUMP INTERVAL
BUMP SETTING
To Next Page
Loading...
