29
2.Press <INSERT/COPY>.The safety question appears:
Insert step ?
ESC/ENT
3.Press <ENTER> to insert the new program step or press <ESC> if you do not want to insert this step.
Example:You want to insert the step prior to the step No.4
Step: 02 Sce: 011 Step: 03 Sce: 012 Step: 04 Sce: 013 Step: 05 Sce: 014
LStp: -- NLop: --- LStp: -- NLop: --- LStp: -- NLop: --- LStp: -- NLop: ---
Prg.time: 10.0s Prg.time: 16.0s Prg.time: 22.0s Prg.time: 28.0s
Fati: 10 StTi: 60 Fati: 15 StTi: 60 Fati: 20 StTi: 60 Fati: 25 StTi: 60
I
Press <INSERT/COPY>,the step sequences will change (the following step 4
will become step 5:
Step: 02 Sce: 011 Step: 03 Sce: 012 Step: 04 Sce: 012 Step: 05 Sce: 013
LStp: -- NLop: --- LStp: -- NLop: --- LStp: -- NLop: --- LStp: -- NLop: ---
Prg.time: 10.0s Prg.time: 16.0s Prg.time: 22.0s Prg.time: 28.0s
Fati: 10 StTi: 60 Fati: 15 StTi: 60 Fati: 15 StTi: 60 Fati: 20 StTi: 60
12.5.Deleting a program
1.Press <ESC> several times until the display shows the initial screen.
2.Press <MENU> and use <UP>,<DOWN> to scroll to the "Make Program" menu and press <ENTER>.The
following message appears:
MAKE PROGRAM
Record: 001
USED
3.Use <UP>,<DOWN> or TILT wheel to select the program which you want to delete and press <DEL>.The
safety question appears:
Delete program ?
ESC/ENT
4.Press <ENTER> to confirm the program deleting.
12.6.Copying a program
1.Press <ESC> several times until the display shows the initial screen.
2.Press <MENU> and use <UP>,<DOWN> to scroll to the "Make Program" menu and press <ENTER>.The
following message appears:
MAKE PROGRAM
Program: 001
USED
3.Use <UP>,<DOWN> or TILT wheel to select the program (e.g.021) to which you want to copy another program
and press <INSERT/COPY>.The following screen appears:
COPY PROGRAM
From:021 To:021
4.Use <UP>,<DOWN> or TILT wheel to select the program which you want to copy to previously selected
program and press <ENTER>.The safety question appears: