32
3.Press <ENTER> to insert the new record step or press <ESC> if you do not want to insert this step.
Example:You want to insert the step prior to the step No.4.
Step: 02 Prg.: 011 Step: 03 Prg.: 012 Step: 04 Prg.: 013 Step: 05 Prg.: 014
Start step: 01 Start step: 01 Start step: 01 Start step: 01
Rec.tim: 800.00 Rec.tim: 1200.00 Rec.tim: 1800.00 Rec.tim: 3200.00
Fati: 10 StTi: 20 Fati: 15 StTi: 60 Fati: 20 StTi: 20 Fati: 25 StTi: 20
I
Press <INSERT/COPY>,the step sequences will change:
(the following step 4 will become step 5)
Step: 02 Prg.: 011 Step: 03 Prg.: 012 Step: 04 Prg.: 012 Step: 05 Prg.: 013
Start step: 01 Start step: 01 Start step: 01 Start step: 01
Rec.tim: 800.00 Rec.tim: 1200.00 Rec.tim: 1600.00 Rec.tim: 2200.00
Fati: 10 StTi: 20 Fati: 15 StTi: 60 Fati: 15 StTi: 60 Fati: 20 StTi: 20
12.8.Deleting a record
1.Press <ESC> several times until the display shows the initial screen.
2.Press <MENU> and use <UP>,<DOWN> to scroll to the "Make Record" menu and press <ENTER>.The
following message appears:
MAKE RECORD
Record: 001
USED
3.Use <UP>,<DOWN> or TILT wheel to select the record which you want to delete and press <DEL>.The safety
question appears:
Delete record ?
ESC/ENT
4.Press <ENTER> to confirm the record deleting.
12.9.Copying a record
1.Press <ESC> several times until the display shows the initial screen.
2.Press <MENU> and use <UP>,<DOWN> to scroll to the "Make Record" menu and press <ENTER>.The
following message appears:
MAKE RECORD
Record: 001
USED
3.Use <UP>,<DOWN> or TILT wheel to select the record (e.g.021) to which you want to copy another record and
press <INSERT/COPY>.The following screen appears:
COPY RECORD
From:021 To:021
4.Use <UP> ,<DOWN> or TILT wheel to select the record which you want to copy to the previously selected
record and press <ENTER>.The safety question appears:
SAVE CHANGES ?
ESC/ENT
5.Press <ENTER> to confirm the copying.
To Next Page
Loading...
Need help?
General
