2.3. SAFETY WARNINGS FOR USE AND OPERATION
The operator must be trained and possess the adequate skills required to carry out the specific tasks and
must be fit to use the machine safely.
When using the machine for the first time, the operator must read the manual and identify the control
functions and simulate some operations, especially machine start and stop.
The machine has been designed and manufactured to meet all the operating conditions indicated by the
Use the machine only with the original safety devices installed by the Manufacturer.
Do not tamper with, disable, remove or bypass the safety devices installed on the machine.
Do not modify the constructive and functional characteristics of the machine in any way.
Do not use the machine with the safety devices not properly installed and efficient.
Always wear the Personal Protective Equipment indicated in the “Instructions for use”,
in particular safety
shoes
, and that provided for by the laws in force on matter of safety in the workplace.
Always keep the perimeter areas in suitable conditions and free from obstacles in order to minimise the
risks for the operator, especially near the control station.
The machine must be used
, that must be appointed and authorised by the employer.
The involvement of one or more assistants when performing some operations or maintenance (ordinary)
interventions may pose unpredictable risks.
In order to minimise the risks related to assistants’ involvement, you must inform them in advance on the
type of work to be carried out and the behaviour to adopt.
Make sure that no unauthorised persons are within the machine operating area during its production activity
Important
Non-compliance with the instructions given may cause risks to the safety and health of people, as well as
economic damages.
To Next Page
Loading...