7. MAINTENANCE INFORMATION
7.1. RECOMMENDATIONS FOR MAINTENANCE
- Stop the machine (as indicated in paragraph “machine safe stop”).
- Proper maintenance will allow a longer life span and constant compliance with safety requirements.
- Before performing any operation, the authorised operator must make sure to have understood the “Instructions
for use”.
- Pay attention to the safety warnings, do not misuse the machine and assess the possible residual risks.
- Carry out the interventions with all the safety devices enabled and wear the required PPE.
- Indicate the intervention areas and prevent access to the devices that, if activated, could cause unexpected
hazards and compromise safety.
- Do not carry out interventions that are not described in the manual but contact an service centre authorised by
the Manufacturer.
- Do not dispose of materials, polluting liquids and the waste generated during the interventions into the
environment but dispose of them according to the standards in force.
To Next Page
Loading...