2.10. MACHINE SAFE STOP
Machine safe stop
Perform the following procedure to safely stop the machine:
1. bring the carriage all down
2. press the emergency stop button
3. open the battery cover (A)
4. disconnect connector (B)
5. close the battery cover (A)
should it not be possible to lower the carriage, the stop at different heights can be considered safe only for
film insertion operations. For all other activities on the carriage, this latter must be kept in the correct position
through the use of external means, such as a support.
Follow the instructions provided in paragraph “ADJUSTMENT OF THE LIFTING CHAIN OF THE SPOOL
CARRIAGE” for the tensioning of the chain
To Next Page
Loading...