3.5. DESCRIPTION OF ACCESSORIES ON REQUEST
To increase the machine performance and versatility, the Manufacturer makes available the following accessories.
− Stain-resistant wheel
Wheels made in a material which reduces the formation of marks on the floor.
− Additional battery kit
it features a charging device, two batteries and two battery containment trays.
The kit allows replacing the tray containing low batteries with the tray of the charged batteries in order to reduce
the time during which the wrapping activity is stopped.
− Spool shaft
it is designed to use film spools with a core diameter different from the standard one.
− Automatic cutting device
it automatically cuts the film at the end of the cycle.
− Black product photocell
its sensitivity level is suitable for detecting also the height of pallets having mostly black surfaces.
− Slide shaft (2400 mm)
it is used to wrap pallets which are higher than the standard ones.
− Double feeler (Ø260÷400 mm)
it is suitable for wrapping pallets having product which irregularly protrudes from the pallet perimeter.
− Feeler with enlarged wheel (Ø400 mm)
It is suitable for wrapping pallets having a product which is not compact.
− Film breakage sensor
it detects when the film breaks or the spool runs out.
To Next Page
Loading...