2.8. INFORMATION AND SAFETY SIGNS
The figure indicates the position of the safety and information signs affixed to the machine.
For each sign the relative description is specified.
1.
Warning sign: it indicates that “the battery must be charged in a suitable well ventilated room, outside of the
work environment”.
2.
Prohibition sign: do not act on the component with your hands.
3.
Warning sign: it indicates the component weight.
4.
Warning sign: it indicates the screws that must be locked after lifting the pole.
5.
Warning sign: it indicates that the batteries of accumulators must be charged after every period of prolonged
inactivity.
6.
Information sign (applied in transport phase): it provides contraindications and indicates how to prepare the
machine for use after the transport phase.
7.
Information sign (applied in transport phase): it indicates how to remove the pallet from the machine.
8.
Information sign (applied in transport phase): it indicates the conditions for lifting the column.
9.
Information sign: It indicates the lifting points with fork device.
10.
Information sign: It indicates the lifting points with hook device.
11.
Electrical hazard sign: do not access the area to avoid risks of electric shock or electrocution.
12.
Hazard sign: do not touch the area to avoid risks of burns.
13.
Information sign: Carefully read the manual before performing any type of intervention.
14.
Prohibition sign: it indicates that the operation must not be performed by more than one person.
Make sure that the nameplates are clearly legible.
If not, replace and reposition them at the original position.
To Next Page
Loading...