9. REPLACEMENT INFORMATION
9.1. RECOMMENDATIONS FOR REPLACING MACHINE PARTS
- Before performing any operation, the authorised operator must make sure to have understood the “Instructions
for use”.
- Carry out the interventions with all the safety devices enabled and wear the required PPE.
- Demarcate the surrounding areas and put in place adequate safety measures, as provided for by the standards
on workplace safety, in order to prevent and minimise the risks.
- Do not carry out interventions that are not described in the manual but contact an service centre authorised by
the Manufacturer.
- Do not dispose of materials, polluting liquids and the waste generated during the interventions into the
environment but dispose of them according to the standards in force.
- Replace the components only with original spare parts or parts with similar design and construction features.
The use of similar but non-original spare parts may result in improper repairs, altered performance and economic
damage.
- Safety components and/or devices must be replaced only with original spare parts to preserve the safety level
required.
To Next Page
Loading...