9.3. RECOMMENDED SPARE PARTS LIST
List of the spare parts that wear easily and that should be always available to avoid long machine downtimes:
- Braked roller pad (Only for spool carriages of "FRD” type).
- Carriage clutch (Only for spool carriages of "PDS” type)
- Drive belt (Only for spool carriages of "PDS "- and "PVS” type).
- Batteries.
- Front wheels.
- Rear wheels
To order them, contact your local dealer and refer to the spare parts catalogue.
9.4. MACHINE DECOMMISSIONING AND SCRAPPING
9.4.1. MACHINE DECOMMISSIONING
- Cut off any supply to the machine (power, pneumatic, etc.) so that it cannot be restarted and position it in a
place that cannot be easily accessed.
- Empty the systems, which contain hazardous substances, in a proper manner and in compliance with the laws
in force at workplaces and with those on environmental protection.
9.4.2. MACHINE SCRAPPING
- Scrapping must be performed by authorised centres with experienced personnel and by using the appropriate
equipment for safe operating conditions.
- The person who performs the scrapping must identify any possible residual energies and implement a “safety
plan” to eliminate unexpected risks.
- The components must be selected according to the chemical and physical features of the material and disposed
of separately, in accordance with the applicable laws.
- Empty the systems, which contain hazardous substances, in a proper manner and in compliance with the laws
in force at workplaces and with those on environmental protection.
To Next Page
Loading...