ElectromagneticCompatibility(EMC)
l
Unauthorized changes to electrical components can lead to increased sensitivity to interference, and increased interference
emission. Asa result, safety components may be impaired.
l
Work on electrical equipment must only be carried out by qualified and authorized personnel.
l
Be aware of the possible residual energy after turning off an electrical device with large capacitive components
ElectricalEnergy
l
Work on electrical equipment must only be carried out by qualified and authorized personnel.
l
Be aware of the possible residual energy after turning off an electrical device with large capacitive components. Wait the
appropriate amount of time before working on the device.
l
Secure the work area with temporary barriersand a warning note. Secure the main switch with a padlock to prevent unauthorized
switching on.
l
Use only isolated toolsin the corresponding voltage level.
l
Use only fuseswith specified cut-off current and appropriate dielectric strength.
13
To Next Page
Loading...
