Testing a Blood Sample • 4
101
With operator list:
3 Wait until the operator list is displayed.
4 Select the operator of choice by touching the
corresponding button or touch Scan to scan an
operator barcode.
5 Enter the (optional) password.
6 After you enter the password, touch to log on.
The Main Menu is displayed and you can start the
test.
7 When you touch , the operator pick list is dis-
played again.
When the tests are completed or another operator wants
to perform additional tests, touch Logout to log out (this
button is available only when the Operator ID is acti-
vated). The meter returns to the display of the operator
pick list.
Note: Scanned operator IDs must also be on the list.
Otherwise the login attempt will fail and an error mes-
sage will be displayed.
Note: Extended data handling functionality and opera-
tor login options are dependent on the capabilities of
the particular Data Management System (DMS) being
used and may vary. For more details see “Data han-
dling”, starting on page 139.
Operator
09:15 am
05/29/2015
Jane Brown
Ann Casey
Joe Dalton
Alan Smithee
Scan
Password
0
|
1234
56789
ABC
09:15 am
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Logout
To Next Page
Loading...
