3.6
A decimal point must be used for decimals.
With “YES/NO” answers, the cursor can be positioned under the cor-
rect answer using the cursor keys.
Every entry must be confirmed by pressing the “Enter” key.
If the value entered is outside the specified limits, Reflotron Plus
performs the calculation with the limit values programmed into the
instrument. This also applies to the following entries.
Limit values programmed into the instrument:
minimum maximum
Cholesterol mg/dl: 110 405
mmol/l: 2.845 10.473
Triglycerides mg/dl: 50.0 400.0
mmol/l: 0.572 4.572
HDL cholesterol mg/dl: 25 75
mmol/l: 0.647 1.94
Age: 40 65
Blood pressure syst. mmHg: 100 225
kPa: 13.33 29.993
The following data are asked for next:
“TG” is the abbreviation for the parameter triglycerides.
Enter the value for HDL cholesterol.
Enter the patient’s age.
“SYST. B.P.” stands for the systolic blood pressure (measured by
sphygmomanometry).
Is there a history of myocardial infarction in first-degree relatives?
Does the patient suffer from angina pectoris?
Does the patient smoke?
Does the patient suffer from diabetes mellitus?
CA R D I A C R I S K
CH O L mg / d l ? > 4 0 5 . 0 0
CA R D I A C R I S K
TG m g / d l ?
CA R D I A C R I S K
HD L m g / dl ?
CA R D I A C R I S K
SY S T . B .P . m mH g ?
CA R D I A C R I S K
AG E Y E A RS ?
CA R D I A C R I S K
SM O K I N G ? N o Y e s
CA R D I A C R I S K
DI A B E T ES ? N o Y es
CA R D I A C R I S K
AN G I N A PE C T . ? No Y e s
CA R D I A C R I S K
IN F A R C T I N F A M . ? N o Y e s
To Next Page
Loading...