Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 124

124 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 9 Parameter Descriptions
Captures and displays Drive Alarm 2 bit pattern at the time of last fault.
Figure 56 - Alarm 2 @ Fault (230)
Selects the function whose value is displayed in Testpoint 1 Data (235). These are
internal values that are not accessible through parameters.
The present value of the function selected in Testpoint 1 Sel (234).
Selects the function whose value is displayed in Testpoint 2 Data (237). These are
internal values that are not accessible through parameters.
230
Alarm 2 @ Fault
Range: See Figure 56
Default: Read Only
Access: 1 Path: Utility > Diagnostics
See also: 211, 221...230
234
Testpoint 1 Sel
Range: 0...65535 [1]
Default: 499
Access: 1 Path: Utility > Diagnostics
See also: 235
235
Testpoint 1 Data
Range: 0...4,294,697,295 [1]
Default: 0
Access: 1 Path: Utility > Diagnostics
See also: 234
236
Testpoint 2 Sel
Range: 0...65535 [1]
Default: 499
Access: 1 Path: Utility > Diagnostics
See also: 237
0000000000000xxx
0011234567891112131415
1 =Alarm Active
0=Alarm Inactive
x =Reserved
Bit #
DigIn CflctA
DigIn CflctB
DigIn CflctC
Bipolr Cflct
MtrTyp Cflct
NP Hz Cflct
MaxFrq Cflct
VHz NegSlope
IR Vlts Rang
FlxAmps Rang
SpdRef Cflct
Ixo Volt Range
Sleep Config
Nibble 1Nibble 2Nibble 3Nibble 4
32