Rockwell Automation Allen-Bradley LiquiFlo 2.0 - Page 127

Rockwell Automation Publication D2-3518-4 - January 2020 127
Parameter Descriptions Chapter 9
(Fault n Time) – (Power Up Marker) = the time difference to the most recent
power up:
•A negative value indicates a fault occurred before the most recent power
up.
•A positive value indicates a fault occurred after the most recent power up.
Selects alarm conditions that initiate a drive alarm. See Chapter 10
for more
information about alarms.
Figure 58 - Alarm Config 1 (259)
Resets all Alarm1...8 Code parameters (262...269) to zero.
259
Alarm Config 1
Range: See Figure 58
Default: See Figure 58
Access: 1 Path: Utility > Alarms
See also:
261
Alarm Clear
Range: 0 = Ready
1 = Clr Alarm Que
Default: 0 = Ready
Access: 1 Path: Utility > Alarms
See also: 262...269
1
111
1
1
1
1
111
11
=Enabled
0=Disabled
x =Reserved
Bit #
Factory Default Bit Values
xxxx
0011234567891112131415
Prechrg Actv
UnderVoltage
Power Loss
Str At PwrUp
Anlg in Loss
IntDBRes OH
Drv OL Lvl 1
Drv OL LVl 2
Decel Inhibit
Waking
Not Synced
Phased ACB
Nibble 1Nibble 2Nibble 3Nibble 4