42 Rockwell Automation Publication 750-RM004A-EN-P - April 2018
Chapter 1 Selection Considerations
IEC Designed to meet:
• IEC 61800-2 Adjustable speed
electrical power drive systems -
Part 2:
• General requirements
• IEC 61800-5-1 Adjustable speed
electrical power drive systems
Atmospheric Protection:
• Conformity with IEC 60721-3-3,
3C2 and 3S2, for components
manufactured by Rockwell
Automation.
• IP54, UL Type 12 Cabinet is
required to meet the 3S2
requirement
ISA — Atmospheric Protection:
• Conformity Standard 71.04, for
components manufactured by
Rockwell Automation.
• Class SA, SB, and SC, Severity X
environmental concentrations
(airborne particulates) with Class
SD particles at Severity 2.
RCM, C-Tick Australian Communications and
Media Authority. In conformity with
the following:
• Radio communications Act: 1992
• Radio communications Standard:
2008
• Radio communications Labelling
Notice: 2008
Standards applied:
• EN 61800-3:2004
Australian Communications and
Media Authority. In conformity with
the following:
• Radio communications Act: 1992
• Radio communications Standard:
2008
• Radio communications Labeling
Notice: 2008
Standards applied:
• EN 61800-3:2012
TUV-FS TÜV Rheinland - Certification
applies to 20D-P2-DG01 Safety
Option Module when installed in a
frame 9…14, 400/480V and 600/
690V drives.
Standards applied:
• EN 61800-5-2:2007 EN 60204-
1:2006
• EN ISO 13849-1:2008 EN
62061:2005
• IEC 61508 Part 1-7:1998, 2000,
and 2010
TÜV and Rheinland – Certification
applies to 20-750-S, 20-750-S1, and
20-750-S3 safety options when they
are installed configured according to
the appropriate safety manual.
Standards applied;
• IEC 61508 PARTS 1…7
• EN 61800-3
• EN 61800-5-1
• IEC 61800-5-2
• EN ISO 13849-1
• IEC 62061
• ISO 60204-1
• Machinery Directive (2006/42/
EC)
ATEX EC-Type-Examination Certificate
TÜV 05 ATEX 7202 for directive 94/9/
EC.
See Appendix E in the PowerFlex
700S Drives with Phase II Control
Programming Manual, publication
20D-PM001, for more information
The 20-750-ATEX module, together
with the ATEX and 11-Series I/O
option modules, are compliant
safety devices under the ATEX
directive 2014/34/EU, and satisfy
requirements for use in Group II,
Category 2, (GD) applications with
ATEX approved motors.
China RoHS2 — Compliant with China Restriction of
Hazardous Substances Directive.
KCC — Korean KC registration
ODVA — (drive) EtherNet/IP
Table 11 - Certifications and Standards Compliance
Description PowerFlex 700S, Frames 9…14 PowerFlex 755TL/TR Drive and
PowerFlex 755TM Common Bus
Inverter, Frames 8…12
Cat. No. 20D… Cat. No. 20G…
To Next Page
Loading...
Need help?
General
