4-12 Configuring the I/O
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
Figure 4.14 Controller Output Tags
Saving the I/O Configuration to the Controller
After adding the bridge and drive/adapter to the I/O configuration, you
must download the configuration to the controller. You should also save
the configuration to a file on your computer.
1. In the RSLogix 5000 window, select Communications >
Download. The Download dialog box (Figure 4.15
) appears.
Figure 4.15 Download Dialog Box
To Next Page
Loading...
