roco Z21 Signal Decoder User Manual

English
57
The Z21 is a ROCO and Fleischmann innovation.
CV Description Range Default
#42 Signal-ID for signal 2, see CV #41 0 - 255 71
#43 Signal-ID for signal 3, see CV #41 0 - 255 71
#44 Signal-ID for signal 4, see CV #41 0 - 255 71
#45 Initialisation signal 1
Determines the signal aspect which should be displayed when the decoder is switched on.
255 = Restore last signal aspect
Displays the signal aspect again which was presented before the decoder was switched
off.
0 = Display standard signal aspect
Displays the default signal aspect of the signal (safe condition “Stop”).
1, 2, 3 … 24 = Explicit specication
Displays the rst, second, third etc. signal aspect. Invalid values lead to specication 0
(standard signal aspect).
You can nd more information on the available signal aspects in Appendix A – Signal con-
guration “Universal” or under the link provided in Appendix B – Signal congurations.
Factory setting: Restore last signal aspect.
0 - 255 255
#46 Initialisation signal 2, see CV #45 0 - 255 255
#47 Initialisation signal 3, see CV #45 0 - 255 255
#48 Initialisation signal 4, see CV #45 0 - 255 255
#61 Current DCC
ext
value from signal 1
This is the DCCext value which corresponds with the signal aspect currently being display-
ed. This CV is not a “conguration”, but rather a live value which for example can be used
for tests during commissioning. This variable can also be written, whereby invalid values
are ignored.
You can nd the valid DCCext value range in Appendix A – Signal conguration “Univer-
sal” or under the link provided in Appendix B – Signal congurations.
#62 Current DCCext value of signal 2, see CV #61 0 - 255 -
#63 Current DCCext value of signal 3, see CV #61 0 - 255 -
#64 Current DCCext value of signal 4, see CV #61 0 - 255 -
#65 Current number of the signal aspect from signal 1
This is the number of the signal aspect currently being displayed. This CV is not a “con-
guration”, but rather, similar to CV #61, a live value which for example can be used for
tests during commissioning. This variable can also be written, whereby invalid values are
ignored.
You can nd more information on the signal aspects in Appendix A – Signal conguration
“Universal” or under the link provided in Appendix B – Signal congurations.
1 - 24 -
#66 Current number of the signal aspect from signal 2, see CV #65 1 - 24 -
#67 Current number of the signal aspect from signal 3, see CV #65 1 - 24 -
#68 Current number of the signal aspect from signal 4, see CV #65 1 - 24 -

roco Z21 Signal Decoder Specifications

General

Brand	roco
Model	Z21 Signal Decoder
Category	Media Converter
Language	English