Welcome to the I/Q Analyzer Application
R&S
®
FSWP
10User Manual 1177.5856.02 ─ 07
Additional information
Several application notes discussing I/Q analysis are available from the Rohde &
Schwarz website:
1EF85: Converting R&S I/Q data files
1EF92: Wideband Signal Analysis
1MA257: Wideband mm-Wave Signal Generation and Analysis
1EF84: Differential measurements with Spectrum Analyzers and Probes
Installation
The R&S FSWP I/Q Analyzer application is part of the optional Spectrum application
and requires no further installation.
2.1 Starting the I/Q Analyzer Application
The I/Q Analyzer is an application on the R&S FSWP.
To activate the I/Q Analyzer application
1. Select the [MODE] key.
A dialog box opens that contains all applications currently available on your
R&S FSWP.
2. Select the "I/Q Analyzer" item.
The R&S FSWP opens a new channel for the I/Q Analyzer application.
The measurement is started immediately with the default settings.
It can be configured in the I/Q Analyzer "Overview" dialog box, which is displayed
when you select the "Overview" softkey from any menu (see Chapter 5, "Configura-
tion", on page 36).
Multiple Channels and Sequencer Function
When you activate an application, a new channel is created which determines the
measurement settings for that application (channel). The same application can be acti-
vated with different measurement settings by creating several channels for the same
application.
The number of channels that can be configured at the same time depends on the avail-
able memory on the instrument.
Starting the I/Q Analyzer Application
To Next Page
Loading...
