Configuration
R&S
®
FSWP
38User Manual 1177.5856.02 ─ 07
Select a setting in the channel bar (at the top of the measurement channel tab) to
change a specific setting.
For step-by-step instructions on configuring I/Q Analyzer measurements, see Chap-
ter 7.1, "How to Perform Measurements in the I/Q Analyzer Application", on page 72.
Preset Channel............................................................................................................. 38
Specific Settings for ..................................................................................................... 38
Preset Channel
Select the "Preset Channel" button in the lower left-hand corner of the "Overview" to
restore all measurement settings in the current channel to their default values.
Note that the [Preset] key restores the entire instrument to its default values and thus
closes all channels on the R&S FSWP (except for the default channel)!
Remote command:
SYSTem:PRESet:CHANnel[:EXEC] on page 86
Specific Settings for
The channel may contain several windows for different results. Thus, the settings indi-
cated in the "Overview" and configured in the dialog boxes vary depending on the
selected window.
Select an active window from the "Specific Settings for" selection list that is displayed
in the "Overview" and in all window-specific configuration dialog boxes.
The "Overview" and dialog boxes are updated to indicate the settings for the selected
window.
5.2 Import/Export Functions
Access: "Save" / "Open" icon in the toolbar > "Import" / "Export"
The R&S FSWP provides various evaluation methods for the results of the performed
measurements. However, you may want to evaluate the data with further, external
applications. In this case, you can export the measurement data to a standard format
file (ASCII or XML). Some of the data stored in these formats can also be re-imported
to the R&S FSWP for further evaluation later, for example in other applications.
The following data types can be exported (depending on the application):
●
Trace data
●
Table results, such as result summaries, marker peak lists etc.
●
I/Q data (in applications that process I/Q data)
The following data types can be imported (depending on the application):
●
I/Q data (in applications that process I/Q data)
Import/Export Functions
To Next Page
Loading...
