Welcome to the I/Q Analyzer Application
R&S
®
FSWP
11User Manual 1177.5856.02 ─ 07
Only one measurement can be performed at any time, namely the one in the currently
active channel. However, in order to perform the configured measurements consecu-
tively, a Sequencer function is provided.
If activated, the measurements configured in the currently defined channels are per-
formed one after the other in the order of the tabs. The currently active measurement is
indicated by a
symbol in the tab label.
The result displays of the individual channels are updated in the tabs (as well as the
"MultiView" ) as the measurements are performed. Sequential operation itself is inde-
pendent of the currently displayed tab.
For details on the Sequencer function see the R&S FSWP User Manual.
2.2 Understanding the Display Information
The following figure shows a measurement diagram during I/Q Analyzer operation. All
different information areas are labeled. They are explained in more detail in the follow-
ing sections.
Figure 2-1: Screen elements in the I/Q Analyzer application
1 = Channel bar for firmware and measurement settings
2+3 = Window title bar with diagram-specific (trace) information
4 = Diagram area with marker information
5 = Diagram footer with diagram-specific information, depending on result display
6 = Instrument status bar with error messages and date/time display
Understanding the Display Information
To Next Page
Loading...
