Rohde & Schwarz FSWP Series - Querying the Status Registers

Remote Commands for the I/Q Analyzer
R&S
®
FSWP
148User Manual 1177.5856.02 ─ 07
MMEMory:LOAD:IQ:STATe 1, <FileName>
This command restores I/Q data from a file.
The file extension is *.iq.tar.
Setting parameters:
<FileName> string
String containing the path and name of the source file.
Example:
MMEM:LOAD:IQ:STAT 1, 'C:
\R_S\Instr\user\data.iq.tar'
Loads IQ data from the specified file.
Usage: Setting only
Manual operation: See " I/Q Import " on page 39
MMEMory:STORe<n>:IQ:COMMent
<Comment>
This command adds a comment to a file that contains I/Q data.
Suffix:
<n>
.
irrelevant
Parameters:
<Comment> String containing the comment.
Example:
MMEM:STOR:IQ:COMM 'Device test 1b'
Creates a description for the export file.
MMEM:STOR:IQ:STAT 1, 'C:
\R_S\Instr\user\data.iq.tar'
Stores I/Q data and the comment to the specified file.
Manual operation: See " I/Q Export " on page 40
MMEMory:STORe<n>:IQ:STATe <1>, <FileName>
Suffix:
<n>
.
1..n
Parameters:
<1>
<FileName>
Manual operation: See " I/Q Export " on page 40
8.9 Querying the Status Registers
The R&S FSWP-I/Q Analyzer uses the standard status registers of the R&S FSWP.
For details on the common R&S FSWP status registers refer to the description of
remote control basics in the R&S FSWP user manual.
Querying the Status Registers