Rohde & Schwarz FSWP Series - Page 141

Remote Commands for the I/Q Analyzer
R&S
®
FSWP
141User Manual 1177.5856.02 ─ 07
<Direction> LEFT | RIGHt | ABOVe | BELow
Direction the new window is added relative to the existing win-
dow.
<WindowType> text value
Type of result display (evaluation method) you want to add.
See the table below for available parameter values.
Return values:
<NewWindowName> When adding a new window, the command returns its name (by
default the same as its number) as a result.
Example:
LAY:ADD? '1',LEFT,MTAB
Result:
'2'
Adds a new window named '2' with a marker table to the left of
window 1.
Usage: Query only
Manual operation: See " Magnitude " on page 14
See " Spectrum " on page 15
See " I/Q-Vector " on page 16
See " Real/Imag (I/Q) " on page 16
See " Marker Table " on page 17
See " Marker Peak List " on page 18
Table 8-6: <WindowType> parameter values for IQ Analyzer application
Parameter value Window type
FREQ Spectrum
MAGN Magnitude
MTABle Marker table
PEAKlist Marker peak list
RIMAG Real/Imag (I/Q)
VECT I/Q Vector
LAYout:CATalog[:WINDow]?
This command queries the name and index of all active windows in the active channel
from top left to bottom right. The result is a comma-separated list of values for each
window, with the syntax:
<WindowName_1>,<WindowIndex_1>..<WindowName_n>,<WindowIndex_n>
Return values:
<WindowName> string
Name of the window.
In the default state, the name of the window is its index.
Configuring I/Q Analyzer Measurements