Analog Modulations
R&S
®
SMA100B
92User Manual 1178.3834.02 ─ 05
"Count"
Sets the number of repetitions of an "On-/ Off-Time" value pair.
Pulses with "Count = 0" are ignored.
Use this method to skip value pairs temporarily, without deleting them
from the table.
Remote command:
[:SOURce<hw>]:PULM:TRAin:ONTime on page 536
[:SOURce<hw>]:PULM:TRAin:OFFTime on page 536
[:SOURce<hw>]:PULM:TRAin:REPetition on page 537
[:SOURce<hw>]:PULM:TRAin:DELete on page 536
Data handling keys
Standard functions for file and data handling.
Note: Save a list only after filling both columns (frequency and level), otherwise the
entries are lost.
Go To ← Data handling keys
Selects a row for editing.
Edit ← Data handling keys
Enables you to insert, or delete a row or ranges within a list, and provides access to a
dialog for automatic filling.
See " Fill... " on page 92.
Save As/Save ← Data handling keys
Saves the list in a file with user-defined name and predefined file extension. To save a
copy or create a file, use the "Save as" function.
Fill...
Provides parameters for filling a table automatically with user-defined values.
Modulation Settings
To Next Page
Loading...
