R&S ZVL Measurement Examples
Basic Measurement Tasks
Operating Manual 1303.6580.32-05
105
Screen Control
Control of the analyzer's display elements is based on the standard Windows™ functionality. The following
examples show you how to make efficient use of the functions.
To move an active setup window within the available space ...
Make sure that the window is not maximized.
Click the
icon in the title bar to open the setup control menu.
Click Move.
After the pointer changes to the four-headed arrow:
Press one of the direction keys (left, right, up, or down arrow key) to move the entire window without
changing its size.
Press ENTER or left-click the window when it is at the position you want.
To size the active setup window ...
Make sure that the window is not maximized.
Click the
icon in the title bar to open the setup control menu.
Click Size.
After the pointer changes to the four-headed arrow:
Press one of the direction keys (left, right, up, or down arrow key) to move the pointer to the border
you want to move.
Press a direction key to move the border.
Press ENTER or left-click the window when it is the size you want.
Data Transfer
The following examples show you how to perform basic tasks related to data transfer from and to the
analyzer.
To copy the active setup ...
Connect a storage device like an USB stick or a CD-ROM drive to an USB connector.
Click Nwa-File — Save Nwa As to open the Save As dialog.
Open the Save in drop-down list and select the storage device and a folder.
Select a File name and click Save to store the data on the storage device and to close the Save As
dialog.
The default extension for setup files (*.nwa) is appended automatically.
To Next Page
Loading...
