Rohde & Schwarz ZVL series - Save Nwa; Save Nwa as; Save as Dialog

R&S ZVL GUI Reference
Nwa-File Menu
Operating Manual 1303.6580.32-06
126
• C
ancel c
loses the dialog without opening a setup file.
Save Nwa
Saves an opened setup to its current name and directory. On saving a setup for the first time, the analyzer
displays the Save As dialog box in order to name the setup file.
To change the name and directory of an existing setup before saving it, choose the Save As
command. If you store device settings file to the C:\R_S\Instr\RecallShortCut directory, you can
recall them using the FILE – Recall Shortcuts submenu.
Save Nwa As
Saves and names the active setup. The analyzer opens a standard Windows™ Save As dialog box to
select a NWA setup file name (*.nwa) and location for the setup file.
To save a document with its existing name and directory, use the Save command. If you store device
settings file to the C:\R_S\Instr\RecallShortCut directory, you can recall them using the FILE –
Recall Shortcuts submenu.
Remote control:
MMEMory:STORe:NWANalyzer 1,"<file_name>"
Save As Dialog
Specifies the name and location of a particular file (e.g. a NWA setup file) to save:
• File Name specifies a file name to save the current data (e.g. the setup). The analyzer adds the
extension (e.g. *.nwa) in the Save As Type box.
• Save in specifies the drive and directory in which the data is stored. The icons to the right of the
pull-down list are provided for easy navigation in the file system (place the cursor on the icons to
obtain What's this? help).
• Save saves the data (e.g. the active setup) in the selected file and directory and closes the dialog.
• Cancel closes the dialog without saving the data.