R&S ZVL GUI Reference
Nwa-File Menu
Operating Manual 1303.6580.32-06
124
5 GUI Reference
This chapter explains in detail all functions of the analyzer and their application. It is organized according
to the menus/softkey groups of the user interface.
All topics in this chapter can be called up directly using the HELP key in the menus or the Help buttons in
the dialogs. A link at the end of each function description leads to the corresponding remote control
command.
For a general overview of the analyzer's capabilities and their use refer to the System Overview.
Nwa-File Menu
The Nwa-File menu provides standard Windows™ functions to create, save, and recall setups, and to shut
down the application.
Setups
A setup comprises a set of diagram areas with all displayed information that can be stored to a NWA
setup file (*.zvx). Each setup is displayed in an independent window.
The File menu contains the following functions:
• New creates a new setup and opens a new setup window.
• Close closes an opened setup window.
• Page Setup... selects print options.
• Save Nwa saves an opened setup.
• Save Nwa As... saves an opened setup to a specific file.
• Recall Nwa recalls an existing setup from a file.
• 1 Set<n>.nwa etc. is a list of the last 4 setups stored in the current or in previous sessions.
• Exit Firmware closes the application.
New
Creates a new setup and opens a new setup window. The new setup is named Setup<n> where <n> is
the current number for all created setups.
To open an existing setup, select File – Recall Nwa. To rename a setup, use File – Save As.
To Next Page
Loading...
