R&S ZVL GUI Reference
FILE Key
Operating Manual 1303.6580.32-06
282
• F
ile Name f
ield
• If the Save or Recall dialog box is opened, the focus is on the File Name field. Enter the name in
the File Name field. The extension of the data name is ignored.
• Comment field
• To enter a comment, press the Edit Comment softkey.
• Items saved in the settings file
• To select a special item, set the focus on the entry using the arrow keys or the rotary knob. To
confirm the selection, press the CHECKMARK key. To deselect the item, press the CHECKMARK
key again.
Save
Opens the Save dialog box to define and store the settings file. To navigate in the dialog box and
define/enter settings use the corresponding softkeys.
Path
Directory in which the settings file is stored. The default path for user settings files is
C:\R_S\Instr\user
Files
List of settings files already stored.
File
Name
Alphanumeric name of settings file.
Comment
Comment regarding the settings file.
[Items] Selection of items to be saved in the settings file.
Save File / Recall File
Saves the settings file with the defined file name (Save dialog box), or recalls the selected settings file
(Recall dialog box). If the file name already exists upon saving, a message is displayed. Selecting Yes
overwrites the existing file, selecting No aborts the saving process.
For details on the file name conventions refer to the Edit File Name softkey description.
If you store device settings file to the C:\R_S\Instr\RecallShortCut directory, you can recall
them using the Recall Shortcuts submenu.
Remote Control:
MMEM:STOR:STAT 1,'TEST'
MMEM:STOR:STAT:NEXT
MMEM:LOAD:STAT 1,'C:\R_S\Instr\user\TEST01'
Select Path
Opens the directory list to select the folder in which the device configuration is to be stored or loaded. The
default path is C:\R_S\Instr\user.
To Next Page
Loading...
