R&S ZVL GUI Reference
Help Menu
Operating Manual 1303.6580.32-06
278
swapped (FO
RM
at:BORDer SWAPped).
• If the PNA language is activated, Agilent-compatible ID and OPT strings are set. The bit
order for transferred binary data is normal.
• If one of the HP xxxx languages is activated, HP xxxx-compatible ID and OPT strings are
set. Binary data is transferred in a device-specific bit order, however, the bit order can be
changed using HP xxxx-specific commands.
The ID string can be changed or reset by using the SETUP key.
Show Error Messages activates a information popup box (tooltip) to be displayed whenever the
parser encounters an remote control command error. The tooltip appears at the bottom of the
remote or manual screen; it is not displayed for SCPI errors no. –113, Undefined header:
The tooltip is to provide information that can be useful for program development and optimization;
it does not necessarily indicate that a remote control script is faulty or non-executable.
Remote control
(for Unit of Length)
UNIT:LENGth
for Keep Measurement
Data...
[SENSe<Ch>:]CORRection:COLLect[:ACQuire]:RSAVe:DEFault
for preset scope:
SY
ST
em:PRESet:SCOPe SINGle | ALL
for GPIB:
FORMat:BORDer NORMal | SWAPped
SYSTem:ERRor:DISPlay
External Tools
Opens a submenu with various demo setups: Demo*.vbs: Shows how to perform the settings for typical
measurement tasks.
After running a *vbs file you can modify the demo setup according to your own needs and store it to a
*.nwa file for later reuse.
Help Menu
The Help menu provides assistance with the network analyzer and its operation.
The Help menu contains the following functions:
• Help Topics opens this help system.
• About NWA... opens a dialog to retrieve information about the network analyzer and the current
firmware version.
To Next Page
Loading...
