R&S ZVL GUI Reference
Trace Menu
Operating Manual 1303.6580.32-06
203
(No direct access via front panel keys)
• Show Limit Line displays or hides the limit line associated with the active trace.
• Limit Check On activates or deactivates the limit check.
• Define Limit Line opens a dialog to define, save or recall limit lines.
• Horizontal Line displays or hides the horizontal line of the active trace and changes its position.
• Global Limit Check activates a global (composite) limit check on all traces in the active setup.
Limit lines are available for all Cartesian diagram types (Trace – Format). For polar diagrams, the
functions of the Lines submenu are grayed. The limit lines are hidden and the limit check is disabled when
a Cartesian trace format is replaced by a polar diagram.
Show Limit Line
Shows or hides the limit line associated with the active trace in a Cartesian diagram area. A checkmark
appears next to the menu item when the limit line is shown.
In the diagram, upper and lower limit lines can be displayed with different colors. Limit line segments with
disabled limit check (see Define Limit Line) can also be colored differently. The limit line colors are defined
in the Define User Color Scheme dialog (Display – Display Config. – Color Scheme...).
Display of the limit line and limit check are independent of each other: Hiding the limit line does not
switch off the limit check.
Remote control:
CALCulate<Chn>:LIMit:DISPlay[:STATe] ON | OFF
To Next Page
Loading...
