R&S ZVL GUI Reference
Trace Menu
Operating Manual 1303.6580.32-06
136
• C
ouple All as
signs all traces to the channel or scale settings selected in the corresponding drop-
down lists. All channel or scale settings except the selected ones are lost. The analyzer displays a
confirmation dialog box before deleting the unused channels.
Remote control:
–
Sort Table
Changes the order of the traces (table rows) in the Trace Manager dialog.
• The drop-down list contains all trace properties that can provide the sorting criterion. The
properties correspond to the column headers in the Trace Manager.
• The two radio buttons qualify whether the traces in the table are sorted in ascending or
descending order, according to the property selected in the pull-down list.
Remote control:
No command, display configuration only.
Trace Statistics
Opens a submenu to evaluate and display statistical and phase information of the entire trace or of a
specific evaluation range.
• Min/Max/Pk-Pk displays or hides the essential statistical parameters of the trace in the selected
evaluation range.
• Phase Delay/El Length displays or hides the phase delay and the electrical length of the trace in
the selected evaluation range (Eval Range...).
• Mean/Std Dev displays or hides the arithmetic mean value and the standard deviation of the trace
in the selected evaluation range.
• RMS displays or hides the RMS value of the trace in the selected evaluation range.
To Next Page
Loading...
