R&S ZVL Preparing for Use
Remote Control in a LAN
Quick Start Guide 1303.6538.62 - 06
36
For more information refer to the Windows XP Help.
1.7.2 Remote Desktop Connection
Remote Desktop is a Windows application which can be used to access and control
the analyzer from a remote computer through a LAN connection. While the
measurement is running, the analyzer screen contents are displayed on the remote
computer, and Remote Desktop provides access to all of the applications, files, and
network resources of the analyzer.
To set up a Remote Desktop connection
1. Connect the analyzer to a LAN and determine its IP address; see Remote Control
in a LAN.
2. Set up your remote computer (integrated in the LAN) to use Remote Desktop and
create the Remote Desktop connection to the analyzer.
For detailed information about Remote Desktop and the connection refer to the
Windows XP Help.
To Next Page
Loading...
