R&S ZVL GUI Reference
Trace Menu
Operating Manual 1303.6580.32-06
178
Remote control:
CALCulate<Chn>:MARKer<Mk>:COUPled[:STATe] ON
Discrete Mkrs
Turns the active marker into a discrete marker and vice versa.
The stimulus value of a discrete marker always coincides with a sweep point. Use discrete markers in
order to avoid that the marker indicates an interpolated measurement value.
Remote control:
CALCulate<Chn>:MARKer<Mk>:MODE
CA
LC
ulate<Chn>:MARKer<Mk>:REFerence:MODE
Mkr Properties...
Opens a dialog to define the properties of all markers of the active trace.
In the left part the dialog contains four input fields and drop-down lists to select a marker and define the
basic properties of a selected marker which is switched on in the Mode panel.
• Select Mkr. opens a drop-down list to select the Ref. Marker or one of the Marker 1, ... 10 that
may be associated with the active trace.
• Name defines a marker name which may exceed the length of the input box and contain letters,
numbers, blanks and special characters.
• Stimulus defines the stimulus value (in Cartesian diagrams: the x-axis position) of the marker.
• Format defines the output format of the marker value.
The Mode panel contains check boxes to select properties that are related to the marker positions. All
properties can be combined.
• Marker On displays the selected marker in the diagram and in the marker info field or removes it.
Marker configurations are only available while the marker is switched On. A removed marker
remembers its properties (stimulus value, format, delta mode, number ...) when it is switched on
again. The marker properties are definitely lost if the associated trace is deleted.
• Fixed Marker freezes thecurrent response value of the selected marker. The marker can still be
shifted horizontally but the vertical position remains fixed if the other marker settings are changed.
To Next Page
Loading...
