Rohde & Schwarz ZVL series - Page 377

R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
362
GHz, using default response values.
CALC:LIM:DATA 1,1500000000, 2000000000,2,3
Define an upper limit line segment in the stimulus range between 1.5 GHz and 2
GHz, assigning response values of +2 dBm and +3 dBm.
CALC:LIM:DISP ON
Show the limit line segment in the active diagram.
CALCulate<Chn>:LIMit:DELete:ALL
Deletes all limit line segments.
<Chn>
Channel number used to identify the active trace.
*RST value –
SCPI, Command
Types
Device-specific, no query.
Example:
*RST; CALC:LIM:CONT 1 GHZ, 1.5 GHZ
Define an upper limit line segment in the stimulus range between 1 GHz and 1.5
GHz, using default response values.
CALC:LIM:DATA 1,1500000000, 2000000000,2,3
Define an upper limit line segment in the stimulus range between 1.5 GHz and 2
GHz, assigning response values of +2 dBm and +3 dBm.
CALC:LIM:DEL:ALL
Delete both created limit line segments.
CALCulate<Chn>:LIMit:DISPlay[:STATe] <Boolean>
Displays or hides the entire limit line (including all segments) associated with the active trace.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Limit line on or off.
*RST value OFF
SCPI, Command
Types
Device-specific, command or query.
Example:
*RST; CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range between 1 GHz and 2
GHz, using default response values.
CALC:LIM:DISP ON
Show the limit line segment in the active diagram.