Rohde & Schwarz ZVL series - Page 419

R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
404
Range [def. unit] –999.999999999 GHz to 1000 GHz. [Hz]
*RST value Highest frequency of the analyzer, depending on the analyzer model.
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:DOMain:USER
CALCulate<Chn>:STATistics:EPDelay[:STATe] <Boolean>
Displays or hides the Phase Delay/El Length results in the diagram area of trace no. <Chn>.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Statistical info field on or off.
*RST value OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:[:STATe]
CALCulate<Chn>:STATistics:MMPTpeak[:STATe] <Boolean>
Displays or hides the Min/Max/Peak-Peak results in the diagram area of trace no. <Chn>.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Statistical info field on or off.
*RST value OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:[:STATe]
CALCulate<Chn>:STATistics:MSTDev[:STATe] <Boolean>
Displays or hides the Mean/Std Dev results in the diagram area of trace no. <Chn>.
<Chn>
Channel number used to identify the active trace.
<Boolean>
ON | OFF - Statistical info field on or off.
*RST value OFF
SCPI, Command Types
Device-specific, command or query.
Example:
See CALCulate<Chn>:STATistics:[:STATe]