R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
548
SYSTem:USER:DISPlay:TITLe '<title>'
Defines a title for the remote display.
'<title>'
Title (string variable)
*RST value – (*RST does not affect the title)
SCPI, Command Types
Device-specific, command or query.
Example:
SYST:USER:DISP:TITL 'Remote test running'
Define a title for the remote display.
SYSTem:USER:KEY <ukey_no>[, '<ukey_name>']
Labels a user-defined key in the remote display. In the query form the command returns whether or not a
user-defined key was used.
<ukey_no>
Number of the user key
Range [def. unit]
0 – Delete all user keys and restore the default keys (Go to Local, Display Off)
1 to 8 – user key numbers
*RST value 0
'<ukey_name>'
Label for user key no. 1 to 8 (string variable)
*RST value '' (empty string)
SCPI, Command
Types
Device-specific, command or query.
Example:
SYST:USER:KEY 1, 'User S11'
Define a user key no. 1 labeled S11. The user key is only labeled, no
functionality has been assigned yet.
SYST:USER:KEY:FUNC 1, 'S11'
Assign the functionality 'S11' (select S11 as a measured quantity for the active
trace) to the created user key.
SYST:USER:KEY?
The query returns 0,'', indicating that no user key has been pressed. If you
press the user softkey no. 1, the response is 1, 'User S11'.
CALC:PAR:MEAS? 'Trc1'
The query returns 'S11','', indicating that the measured quantity for trace 'Trc1'
has been changed.
SYST:USER:KEY 0
Delete the user key and restore the default keys..
SYSTem:USER:KEY:FUNCtion <ukey_no>[, '<ukey_name>']
Labels the functionality of a function key to a user-defined key in the remote display.
You can use this command to execute part of your measurement task manually; see Combining
To Next Page
Loading...
