Rohde & Schwarz ZVL series - Page 571

R&S ZVL Command Reference
Instrument-Control Commands
Operating Manual 1303.6580.32-05
556
*RST value – (a *RST does not affect the default unit of length)
SCPI, Command
Types
Device-specific, command or query.
Example:
UNIT:LENG METer; :CORR:EDEL:DIST 1
Define a mechanical length offset of 1 m.
UNIT:LENG FOOT; :CORR:EDEL:DIST?
Change the default unit of length and query the mechanical length. The
response is 3.2808400526.