Rohde & Schwarz ZVL series - Page 584

R&S ZVL Programming Examples
Basic Tasks
Operating Manual 1303.6580.32-05 569
// 2. Create second diagram area and display traces
DISPlay:WINDow2:STATe ON
DISPlay:WINDow1:TRACe2:FEED 'Admittance_trace'
DISPlay:WINDow1:TRACe3:FEED 'Y_trace'
DISPlay:WINDow2:TRACe1:FEED 'Impedance_trace'
DISPlay:WINDow2:TRACe2:FEED 'Ratio_trace'
DISPlay:WINDow2:TRACe3:FEED 'Z_trace'
//
//
Check the result on the local screen
// Go to local
SYSTem:DISPlay:UPDate ONCE
//
//
// 3. Check and modify your configuration
// Query the traces in channel 1.
CALCulate1:PARameter:CATalog?